BRAKE WORK

HOME > SERVICES OFFERED > FLEET BRAKES

At Taylor Automotive, LLC, we want our Canton customers to have the opportunity to feel comfortable in their vehicle. You can leave the repairs and services to our professionals, but please don't hesitate to ask us questions about why a service is needed or how it occurred. Give us a call at 903-567-3948, and we will be happy to speak with you.

Brake Maintenance & Repair
Truck brakes are much more powerful than car brakes. Faulty truck brakes put the truck driver, the load, and other road users at risk. If you are not confident in your truck's ability to stop firm and straight when you hit the brakes, then it is time to have them checked and replaced if necessary. At Taylor Automotive, LLC, we will diagnose your truck and fleet's brake problems and offer high quality brake work. Visit our auto shop or call us today 903-567-3948.

Hydraulic Brakes
A hydraulic brake is a type of braking system that uses brake fluid to transfer pressure to the brake pads. Although most heavy trucks use air brakes, some trucks have hydraulic brakes. A hydraulic brake consists of the following: a brake pedal, a push rod, a cylinder chamber, and brake pads. With time, the hydraulic brakes components wear out and thus need replacement. For all your hydraulic brake system needs, visit Taylor Automotive, LLC or call us at 903-567-3948. We boast the most experienced hydraulic brake experts in the region.

Associations

  • ASE (Automotive Service Excellence)
  • CARQUEST
  • TECH-NET
  • World Pac
  • Car Care Aware

Vehicle Tips

  • According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
  • The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
  • Never remove the radiator cap until the engine has thoroughly cooled. The tightness and condition of drive belts, clamps and hoses should be checked by a pro.
  • Change your oil and oil filter as specified in your manual, or more often (every 3,000 miles) if you make frequent short jaunts, extended trips with lots of luggage or tow a trailer.
  • Replace other filters (air, fuel, PCV, etc.) as recommended, or more often in dusty conditions. Get engine drivability problems (hard stops, rough idling, stalling, diminished power, etc.) corrected at a good shop.
  • A dirty windshield causes eye fatigue and can pose a safety hazard. Replace worn blades and get plenty of windshield washer solvent.
  • Have your tires rotated about every 5,000 miles. Check tire pressures once a month; let the tires cool down first. Don't forget your spare and be sure your jack is in good condition.
  • Check your owner's manual to find out what fuel octane rating your car's engine needs then buy it.
  • Keep your tires inflated to the proper levels. Under-inflated tires make it harder for your car to move down the road, which means your engine uses more fuel to maintain speed.
  • Lighten the load. Heavier vehicles use more fuel, so clean out unnecessary weight in the passenger compartment or trunk before you hit the road.
  • Use the A/C sparingly. The air conditioner puts extra load on the engine forcing more fuel to be used.
  • Keep your windows closed. Wide-open windows, especially at highway speeds, increase aerodynamic drag and the result is up to a 10% decrease in fuel economy.
  • Avoid long idling. If you anticipate being stopped for more than one minute, shut off the car. Contrary to popular belief, restarting the car uses less fuel than letting it idle.
  • Stay within posted speed limits. The faster you drive, the more fuel you use. For example, driving at 65 miles per hour (mph) rather than 55 mph, increases fuel consumption by 20 percent.
  • Use cruise control. Using cruise control on highway trips can help you maintain a constant speed and, in most cases, reduce your fuel consumption.
  • Keep your engine tuned. A fouled spark plug or plugged/restricted fuel injector can reduce fuel efficiency as much as 30 percent.
  • Inspect the engine's belts regularly. Look for cracks or missing sections or segments. Worn belts will affect the engine performance.
  • Have the fuel filter changed every 10,000 miles to prevent rust, dirt and other impurities from entering the fuel system.
  • Change the transmission fluid and filter every 15,000 to 18,000 miles. This will protect the precision-crafted components of the transmission/transaxle.
  • Inspect the suspension system regularly. This will extend the life of the vehicle's tires.