Auto Machine Shop Services

HOME > SERVICES OFFERED > MACHINE SHOP

Brake Drum / Rotor Resurfacing
A brake drum/rotor is not meant to last forever. They wear down a little every time you step on the brake pedal. Most modern cars come with thinner rotors to save on weight. Due to their slimness, the rotors wear out faster. For this reason, it is advisable to have the rotors and brake drums resurfaced every time you are replacing the brake pads. Resurfacing is an economical alternative to replacing the rotors/drums with new ones. If your brake rotors/drums have sufficient metal remaining with no hard spots, cracks, severe grooving, or rusting, then resurfacing is a great option. For expert resurfacing services, call 903-567-3948 or visit Taylor Automotive, LLC today.

Press U Joints
A clunking or clicking sound from underneath your car may indicate a worn out universal joint (U joint). A worn U joint can be replaced easily by use of a press machine. First press one side, remove the cap and then press the other side in the same fashion. Although easy, most auto shops do not press U joints due to lack of the necessary machinery and expertise. At Taylor Automotive, LLC's machine shop, we have the necessary press machines and qualified staff to press your car's U joints.

Press Wheel Bearings
At Taylor Automotive, LLC's machine shop, we will handle all your wheel bearing needs with our high-tech press machines. Call us at 903-567-3948 or visit us in Canton, TX 75103 today.

Fluid Recycling
Fluids are vital to engine operations. Replacing and disposing of used fluids (oil and other coolants) is both time consuming and costly. By recycling fluids, you will cut your costs and save the environment! Taylor Automotive, LLC offers a fluid recycling service. For all your fluid recycling needs call or visit Taylor Automotive, LLC today. Unlike other recyclers, we offer you personalized reclamation options that meet your specific needs.

Used Oil Drop-Off Location
Recycling used oil from your car is simple and good for the environment. To have your used oil recycled, you need to take it to a used oil drop-off location like Taylor Automotive, LLC. We collect used oil for recycling as a service to our customers and the environment. Give us a call today 903-567-3948.

    Associations

    • ASE (Automotive Service Excellence)
    • CARQUEST
    • TECH-NET
    • World Pac
    • Car Care Aware

    Vehicle Tips

    • According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
    • The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
    • Never remove the radiator cap until the engine has thoroughly cooled. The tightness and condition of drive belts, clamps and hoses should be checked by a pro.
    • Change your oil and oil filter as specified in your manual, or more often (every 3,000 miles) if you make frequent short jaunts, extended trips with lots of luggage or tow a trailer.
    • Replace other filters (air, fuel, PCV, etc.) as recommended, or more often in dusty conditions. Get engine drivability problems (hard stops, rough idling, stalling, diminished power, etc.) corrected at a good shop.
    • A dirty windshield causes eye fatigue and can pose a safety hazard. Replace worn blades and get plenty of windshield washer solvent.
    • Have your tires rotated about every 5,000 miles. Check tire pressures once a month; let the tires cool down first. Don't forget your spare and be sure your jack is in good condition.
    • Check your owner's manual to find out what fuel octane rating your car's engine needs then buy it.
    • Keep your tires inflated to the proper levels. Under-inflated tires make it harder for your car to move down the road, which means your engine uses more fuel to maintain speed.
    • Lighten the load. Heavier vehicles use more fuel, so clean out unnecessary weight in the passenger compartment or trunk before you hit the road.
    • Use the A/C sparingly. The air conditioner puts extra load on the engine forcing more fuel to be used.
    • Keep your windows closed. Wide-open windows, especially at highway speeds, increase aerodynamic drag and the result is up to a 10% decrease in fuel economy.
    • Avoid long idling. If you anticipate being stopped for more than one minute, shut off the car. Contrary to popular belief, restarting the car uses less fuel than letting it idle.
    • Stay within posted speed limits. The faster you drive, the more fuel you use. For example, driving at 65 miles per hour (mph) rather than 55 mph, increases fuel consumption by 20 percent.
    • Use cruise control. Using cruise control on highway trips can help you maintain a constant speed and, in most cases, reduce your fuel consumption.
    • Keep your engine tuned. A fouled spark plug or plugged/restricted fuel injector can reduce fuel efficiency as much as 30 percent.
    • Inspect the engine's belts regularly. Look for cracks or missing sections or segments. Worn belts will affect the engine performance.
    • Have the fuel filter changed every 10,000 miles to prevent rust, dirt and other impurities from entering the fuel system.
    • Change the transmission fluid and filter every 15,000 to 18,000 miles. This will protect the precision-crafted components of the transmission/transaxle.
    • Inspect the suspension system regularly. This will extend the life of the vehicle's tires.